Wednesday, August 31, 2016

Z3X BOX LG 2 3G Tool v2 9 Released

Z3X BOX LG 2 3G Tool v2 9 Released


Z3X-BOX LG

















LG 2-3G Tool v2.9 Released.

More and more Hot updates coming

New phones added:

- support LG E410 (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E410b (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E410f (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E410g (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E410i (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E411g (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E415f (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)
- support LG E415g (Direct unlock/imei repair, read/write/repair NVM, repair SECURITY, AUTOROOT)

P.S.Please post here most wanted phones for adding, we checking this topic.
Our updates will follow your records there.

LG activation can be activated to your Z3X-BOX samsung or to Z3X Easy-JTAG.
About price for this adition activation contact with resellers.
Bulk oder - contact with US. Resellers Welcome.








-

Available link for download

Read more »

Samsung N8000 arabic firmware multipakage

Samsung N8000 arabic firmware multipakage


N8000 arabic firmware multipakage

BOOTLOADER_N8000XXCLL6_754275_REV00_user_low_ship. tar.md5 (1.9 MB)
CODE_N8000XXCLL6_754275_REV00_user_low_ship.tar.md 5 (1.13 GB)
MODEM_N8000XXCLL1_REV_00_CL1229839.tar.md5 (12.0 MB)
CSC_OJV_N8000OJVCLL3_772266_REV00_user_low_ship.ta r.md5 (284.7 MB)


Available link for download

Read more »

Nokia Asha 202 RM 834 latest flash files Free download

Nokia Asha 202 RM 834 latest flash files Free download


Nokia Asha 202 RM-834 latest flash files Free direct download only 3 files mcu,ppm,cnt  just click on file for direct download 

Latest Version 20.52
1) MCU
2) PPM 
3) CNT

Version 20.50
1) MCU
2) PPM 
3) CNT

Version 20.28
1) MCU
2) PPM 
3) CNT


Available link for download

Read more »

When Dialing 911 on a Cell Phone or VoIP Service Location Tracking is Limited

When Dialing 911 on a Cell Phone or VoIP Service Location Tracking is Limited


Mobile Phone In Pocket With Emergency Number 911. Focus On Screen
Weve all seen it in films: Someones in a crisis circumstance, so they dial 911 on a landline telephone and keep running off. The police then hurry to their area. This area following doesnt fill in also with phones and VoIP administrations.

As we move from landline telephone administrations to cell telephones and VoIP administrations, its imperative to understand the confinements. In a crisis circumstance, you ought to attempt to remain focused line sufficiently long to give the administrator your exact area.

How 911s Landline Location Tracking Works

On account of something many refer to as "Upgraded 9-1-1" — utilized as a part of North America — your area is recorded when you ring 911 on a landline phone. "The general population wellbeing noting point" that gets the call then uses your telephone number to turn upward your area in a database.

This for the most part works exceptionally well, and rapidly. As were discussing landline telephones here, every landline telephone has a particular physical location connected with it — for instance, a house address or loft building address and flat number. Indeed, even this framework can at times come up short if the telephone number isnt went along legitimately or the data in the database isnt right, in which case the 911 administrator would need to approach you for your area.

Its generally a smart thought to remain focused line to give your area and whatever other pertinent data!

Vintage telephone on green foundation. Hotline bolster idea. 3d

Mobile phones and VoIP Services Challenge This

Phones arent connected to a solitary physical area — theyre continually moving around. Be that as it may, their areas can be followed with triangulation (contrasting the relative sign quality between three cell towers) and their GPS equipment.

VoIP administrations are significantly harder to track, as the brings are sent over the Internet and basically originated from an IP address with no phone tower data or GPS information to depend on. Both of these new advancements posture challenges.

The amount Location Data is Sent From Your Smartphone

Be that as it may, some area information is still sent! In 1996, the US FCC started requiring remote transporters to transmit area information from 911 calls put from cellular telephones on their systems. The necessities inclined up from just sending the area of the phone tower the call was put on to giving the area of the calling mobile phone itself.

Cell transporters might get this information from cell triangulation, or the telephones GPS chip itself. Then again, theres no acknowledgment that they can get the information from the Wi-Fi information that advanced telephones use to track our areas much all the more decisively, particularly inside.

Transporters are required to give a telephones area "inside of 50 to 300 meters." Thats 164 feet to 984 feet. Its implied this is genuinely uncertain, particularly in case youre in a thick, urban territory with bunches of structures and individuals. Whats more, this is for open air areas. Theres additionally no real way to pinpoint you on a particular floor of an indoor territory.

In this way, while this is superior to anything nothing, its not something you need to depend on in a crisis circumstance. The FCC needs to fix area prerequisites for mobile phone 911 calls, yet this wont happen until 2019 at indisputably the soonest.

Transmitter

VoIP Location Reporting

VoIP administrations are significantly harder to manage here. When you dial 911 from Skype or the telephone call highlight in Gmail, what happens? Regularly, nothing happens. To stay away from risk, numerous administrations — like Skype and Gmail — wont permit you to call 911 by any stretch of the imagination. They make it clear theyre not a substitution for customary telephone servics in crisis circumstances. That is something to hold up under as a primary concern — you cant utilize Skype or Gmail to put a 911 bring in a crisis, despite the fact that they can be a helpful swap for conventional telephone administration in numerous different circumstances.

Some VoIP administrations do permit you to call 911, however — particularly ones intended to supplant a conventional landline telephone. You enlist your place of residence with these administrations and theyll give it to a 911 administration if there should be an occurrence of crises. Make certain to investigate whether your VoIp supplier underpins 911 and guarantee you know how it will function in a crisis.

Different types of VoIP — for instance, a vast office fabricating that uses voice-over-IP highlights — can have physical location information alloted to each VoIP endpoint. It would be workable for a partnership utilizing a VoIP system to have the precise floor and office number of each VoIP telephone call followed in an area database that could be given to 911 administrations, for instance.

voip telephone

Coincidentally, you additionally likely cant contact 911 with an instant message. Content to-911 administration is still exceptionally uncommon and just accessible in constrained ranges. This ought to end up across the board eventually, be that as it may. Until further notice — like with area following — its essential to hold up under the impediments personality a main priority. That learning might conceivably help you on the off chance that you ever need to contact 911

Available link for download

Read more »

Norman Malware Cleaner 2 08 05 2013 07 18

Norman Malware Cleaner 2 08 05 2013 07 18



Norman Malware Cleaner is one of the new apps in the security software industry, promising to keep computers around the world away from malware and other dangerous files that could compromise users safety.

Although it comes packed as an over 130 MB file, Norman Malware Cleaner has adopted a different approach.

This software doesnt have an installer, since viruses are now attempting to block installation of antiviruses and security tools, so its being delivered as an executable file, which means you only need to double click the file to launch the app.

The interface is pretty basic and thats a very good thing, since the purpose of the whole software is to find and delete infections.

There are four scanning modes, quick, normal, full and custom, so choose the one that fits you best. Of course, the full mode will need much more time, while the quick one is better for a quick analysis of the computer.

During our testing, scanning the computer in quick mode took around 2 minutes, while the full option needed around 20 minutes to complete. Still, the latter was a bit more efficient as it checked every single file on the computer for malicious data.

There are multiple options available in the dedicated tab, giving you the power to enable verbose logging, quarantine, archive unpacking, memory scanning, FakeAV scanning, rootkit cleaning, multithreading, detection of potentially unwanted programs and Sandbox.

The Quarantine tab provides a quick look over the suspicious files detected by Norman Malware Cleaner, with dedicated tools to restore or delete the files permanently at the bottom of the main window.

Norman Malware Cleaner is no replacement for a fully fledged antivirus, but if cleaning your computer of infected files wasnt possible with the existing tools, this one is really worth a chance.


 DOWNLOAD HERE
or Here

Available link for download

Read more »

Single Mosfet Class A Power Amplifier Circuit

Single Mosfet Class A Power Amplifier Circuit


The post discusses a simple, cheap single mosfet class A power amplifier circuit which can be used for any small scale audio amplifier application.


By: Dhrubajyoti Biswas

This following data will detail how to build an amplifier having zero negative feedback which implies building a zero component amplifier. The amplifier will be single-ended and Class A.

To begin with, let us first lay down the circuit design of the proposed amplifier, as given under:





To build the circuit we need: A MOSFET, some capacitors and resistors and a sturdy power supply which has to be properly filtered using large filter capacitors. The amplifier we are building is built by incorporating the device 2SK1058 N-Channel MOSFET from Hitachi. The pin diagram is shown below:





The capacitors that we used in this experiment is that of Sprague. This is used to couple the input and on the output a large electrolytic along with polyester bypass capacitor of 10µF. To manage the load, we used four non-inductive wire wound resistors of 10W.

However, to achieve total resistance of 15 ohms, the resistors are wired on a series of two, which makes 30 ohms and furthermore setting up the sets in parallel. Please note, the device would be hot and susceptible to burning during idle mode, hence caution is utmost important.

Class-A can never be an ideal option for a high efficiency amplifier design, but as we are applying the idea in this setup, we had to use more than 20 Watts power to generate a modest 4.8 Watts audio. The heat-sink used for the mosfet was of 0.784 °C/W.

Power Supply

The power supply used for this single mosfet class A power amplifier circuit is 18VAC and 160VA EI transformer attached to a bridge rectifier of 25 amp to generate DC power of 24 Volts.

To filter and smooth the power we used 10000µF capacitors and Hammond make 10mH choke of 5 amp over pi filter setting [Cap - Choke - Cap]. The bias was via a pot of 100K along with resistor of 1M.

Care should be taken to adjust the pot only for so long as half of the DC gets over the load resistors and MOSFET.










Available link for download

Read more »

PAC MAN for BlackBerry Games

PAC MAN for BlackBerry Games


Blackberry games free download. PAC-MAN for BlackBerry Games. This game is PAC-MAN for BlackBerry Games free download.

PAC-MAN BIRTHDAY SALE! All PAC-MAN Apps on Sale May 19th to June 19th!   Namcos world famous arcade game returns and now hes totally portable! Who can forget the countless hours and quarters spent avoiding the pesky ghosts while chompin on the dots? Or gobbling up the fruit for bonus points! Re-live the arcade action on your BlackBerry phone.   • Your classic yellow hero in the palm of your hand.  • Master levels and unlock new ones.  • 256 levels are included!  • PAC-MAN and his 4 foes are chomping into your phone!  • Chomp dots, outrun ghosts, and relive the arcade action.  PAC-MAN supports Bluetooth controller input! Ensure that your controller is set to HID mode and pair with your BlackBerry for intense arcade action! Please refer to your manufacturers manual to determine if you need to manually set the HID pairing scheme.  We recommend that you update your device to the latest BlackBerry OS version before playing.

Screenshots

 


Download Now

Available link for download

Read more »

Volcano Box Latest Update v2 9 9 Version Free Download

Volcano Box Latest Update v2 9 9 Version Free Download


Volcano Box Latest Update v2.9.9

http://www.mobilesolutionrd.com/
Volcano Box 

What New Update in Volcano Box v2.9.9


1. Added Support for new flash read file MTK6595

2. Added Support for new flash Write file MTK6595

3. Improved MTK Android breakpoint continue reading

4. Added Support for new flash SPD Android SPD6820

5. Added New & Worlds 1st Algorithm for Repair MTK Imei.

6. Improved Privacy Password/Anti Theft Unlock.


Click Here Free Download Latest Update v2.9.9

Available link for download

Read more »

Simple Crystal Radio Circuit using No Batteries

Simple Crystal Radio Circuit using No Batteries


A crystal radio circuit is probably the simplest form of radio that uses hardly any electronic components, and needs absolutely no external power for the operations.

The only downside of this radio concept is the requirement of a very long antenna and a deep earthing, therefore this unit is not something which you can carry in your pocket, nevertheless the extreme simplicity and the no power operation feature make this circuit an amazing device.


 The main components involved with this simple crystal radio set circuit are an ordinary antenna coil, a detector diode, an optional resistor, and a crystal earphone. The detector diode could be any regular germanium diode such as OA91 or 1N34A etc.

A crystal earphone is recommended here, due to its high impedance property, which makes it a voltage sensitive device rather than a current sensitive device.

 Meaning the earphone would be able to transform even the weakest of voltage frequencies regardless of the current (mA) magnitude, enabling hearing of even the feeblest of the radio signals. This is crucial since no external power is being used for the amplification.

Typically a crystal earphone with a  range of 2K ohms should be just good enough value for our crystal radio application.

To check the efficiency level of a crystal earphone, you could probably do a few simple but very interesting tests with it. 

The first test could be performed by simply scratching the end terminals of its wires with each other, this should produce faint clicking sound in the earphone, another test can be tried by firmly holding the stripped ends of its wires and standing near your home mains line....this should enable you to hear a reasonably strong humming sound in the earphone. These tests might be enough to convince you regarding the high level of sensitivity that these units may be specified with.  

This high sensitivity of the crystal earphone along with the resonant tuning of the radios LC tank circuit stage, together ensures a sound level thats loud enough to be clearly heard without using any form of external power supply.  

With no external power, the weak electrical pulses of the radio signal is itself processed and used by the crystal circuit and the crystal earphone and is made efficiently audible in our ears.

This radio can be used for hearing local stations at around 50kms range during daytime and from over 100 of miles away at night when the surrounding noise is much reduced compared to the daytime commotion.

The key element that helps the crystal set to grab even the minutest of radio reception is the length of the antenna used, it should be preferably a 30to 40 meter long flexible wire suitably tied and hung at some elevation such as a tree branch etc.

The antenna will be capable of capturing quite many radio stations including the night time DX stations, due to the favorable ionosphere transition after the sun goes down.

The second crucial element of the design is the "earthing" or the ground quality, which should not be ignored otherwise the radio could simply refuse to provide the intended results.

A perfect ground can be achieved by inserting a steel rod deep into a 5 feet hole dug on earth which should be first adequately watered to make it soft and then a bag of salt thrown into it to make things sufficiently conductive, and for creating an efficient grounding for the circuit.

Another easy method for achieving the earthing is by using the tap or the metallic plumbing line of your bathroom which also would act as a very good earthing for the circuit.

Simple Crystal Radio Circuit using No Batteries


Circuit Description

Once the above mentioned antenna and the earthing is correctly set up, its time to connect the simple crystal radio circuit with these parameters.

Referring to the figure above, we see that the circuit hardly comprises any serious parts, it uses one antenna coil made by winding many turns of thin copper wire over a plastic bobbin with three wire ends terminating outwards, wherein the mid tap is used for the antenna connection.

The resonant tank circuit is formed by connecting a trimmer parallel to the antenna coil ends, this trimmer could be any MW GANG capacitor, again the same could be salvaged from any old radio set.

The radio signals are picked and resonated to the peak level through this tank circuit network, however in order to detect and demodulate the sound from the signals carrier waves we need another stage for this function.

An ordinary germanium diode is what we need to carry out the detection work and it does this quite effectively. Even our very familiar silicon 1N4148 could be tried for the job but only in case you are unable to procure the regular OA91 or the IN34A type of devices. And this part is the only active component involved in the whole circuit for reproducing the original sound from the captured signals, thats amazing.

How to Wind the Antenna Coil:

The antenna coil is an air cored winding, its built with the following simple steps:

You will need a 1 or 1.5 inch diameter, and 4 inches long plastic pipe for the bobbin.

Over this pipe wind some 65 turns of any thin super enameled copper wire or any thin insulated flexible wire such as a 7/36 multi strand insulated wire.

Make sure to pull out a center tap at around 18th turn of the winding, or some other number tap can also experimented with for trying preferred customized receptions. 

Thats all, the antenna coil is ready and may be used for the above explained simple crystal radio circuit.

If you have any questions or doubts, dont hesitate to put it forth through comments below





Available link for download

Read more »

WWE 2012 SMACKDOWN VS RAW for BlackBerry Storm

WWE 2012 SMACKDOWN VS RAW for BlackBerry Storm


Overview:
Free WWE 2012 SMACKDOWN VS. RAW games for BlackBerry. WWE 2012 SMACKDOWN VS. RAW is game for BlackBerry Storm.

Description:
WWE 2012 SMACKDOWN VS. RAW is a professional wrestling video game developed by Yukes and published by THQ for the PlayStation 3, Wii, and Xbox 360 systems. It is the first game in the WWE series and the fourteenth overall in the combined series. It is the sequel to WWE SmackDown vs. Raw 2011. It is also the first game in the series developed exclusively for current generation home consoles. It was released on November 22, 2011 in North America and on November 25 in the United Kingdom.

WWE 2012 Smackdown Vs. RAW is now available for BlackBerry.

Model:
BlackBerry Storm 9500, BlackBerry Storm 9530.

Download Now

Available link for download

Read more »

Volcano Box v2 9 8 Latest Setup Download

Volcano Box v2 9 8 Latest Setup Download




Volcano Box’s features:
MTK, SPD, MSTAR, Infineon, Philips, ADI, Anyka,
 SKY, SI, TI CPU Support
Digital resistance
Complete GND and VCC control functions
Set pull up/down to any pinout
Volcano box selects resistor value from 390 ohm – 800K
Eagle Eye function
Internal powerful CPLD
Better software and hardware protected design
More reasonable USB pathway design
Test battery
Volcano is a very unique and powerfull box which is designed
specially for chinese mobiles
Many features are EXCLUSIVELY ON VOLCANO
is only available on volcano box, its unique and
world’s 1st no other box have it.
What’s new ?
World’s 1st MTK Latest Android CPU 6595-4g Reading
World’s 1st MTK Latest Android CPU 6595-4g Writing
Added Reset Android Anti-Theft lock
Improved Repair MTK 6261 imei.
Adjust MTK android format.

Important note:
Only Volcano Module exe will not able to run.
You have to Extract/Copy Volcano Module update files
into Volcano YellowStone folder to able to Work fine

Download Mediafire




Blog Archive