Gadget Download

 As you have all require things so lets understand how to connect it.

1. Connect volcano box to computer via usb cable

2. Connect volcano boxs main cable to volcano box (the cable which have Red & Black wires)

3. Connect Jig P- 04A to volcano boxs main cable make sure you it with correct way. Please look           have a picture. Arrow must be on thumbs side.

4. Insert P-04A jig into Vitools

5. Attach Sensor with ViTools

6. Plug Cables connector into Iphone (the Cable which have two usb male connectors)

7. Connect one uusb connector to directly computers USB port and check if it start charging or not if      not then plug another USB.

8. Now Connect last USB connector into ViTools (if have Iphone5/ 5C/5S etc then use Adaptor)

9. Volcano Utility_iphone already opened if not please run it

10.Now Place sensor onto Iphones Screen (make sure Iphone screen is in idle state)

     from Software press Unlock button and wait till software find its correct code.

11.After its finished your Iphone will be Unlocked and on Software you can see which passcode your      Iphone have.