Showing posts with label s3. Show all posts
Showing posts with label s3. Show all posts

Monday, October 17, 2016

Odin3 v3 09 flasher tool for Samsung Galaxy S3 Download

Odin3 v3 09 flasher tool for Samsung Galaxy S3 Download


Download the new Odin3_v3.04 a new flasher tool for Samsung Galaxy S III, the successor of Galaxy S2 that has launched around the world. The Odin3_v3.04 is the default PC application that can be used to manually install or flash Stock ROM, Kernels, Modems and Custom ROM. If you are an advanced user and an expert of tweaking Galaxy S3 firmware, you need this to enjoy more of your device.



Available link for download

Read more »
Posted by at
Labels: , , , , , , , , ,

Sunday, August 28, 2016

SAMSUNG S3 I9300 GALAXY NOTE 2 N7100 Boot Reapir

SAMSUNG S3 I9300 GALAXY NOTE 2 N7100 Boot Reapir


Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link
IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)
1)First Create Boot Card
2)Download teraterm-4.78
teraterm-4.78
3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)

Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper.
Select Spt Serial Port (look the picture)

After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button


Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes
Quote:
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: param.j4fs does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw download_error.jpg...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: download_error.jpg j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,
After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture


open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.
Quote:
TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.
any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMMC

THIS SOLUTION FROM SAMSUNG OFFICIAL TEAM

Available link for download

Read more »
Posted by at
Labels: , , , , , , , ,

Root step by step Manual i8190 N L T I Galaxy S3 Mini

Root step by step Manual i8190 N L T I Galaxy S3 Mini


How to Root I8190 / I8190N / I8190L / I8190T Galaxy S3 Mini -
STEP BY STEP rooting manual for GSM-Hosting users

I have some good news today.
Official recovery files from CWD i found.

What we have?
Simple, now we hav easy and fast way for root any I8190 L, I, T, N Galaxy S3 Mini.
Just Follow Manual now.


1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.

Done ! And you are ready to go

thanks goes to chotu.

You can also use old method for root i8190 - prerooted firmware.
After few days i will update thread and will add link for prerooted Firmware.
i8190 prerooted - will be HERE.
i8190 prerooted - will be HERE.

Available link for download

Read more »
Posted by at
Labels: , , , , , , , , , , ,
Subscribe to: Posts (Atom)