Gadget Download

SPD 6531 All Spd imei Write With New Magic Usb Cable

HOW TO MAKE SPD IMEI WRITE Cable - only disconnect usb + supply (vcc) your cable is ready

















Write imei usb disconnect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-insert usb cable in mobile without battery
11-click on write imei
12- then insert battery, no need press any boot key and wait 10 secnd
imei write successfully

Available link for download

Samsung I9105 imei repair done

Samsung I9105 imei repair don BY SAGAR NADEEM


How to Root I9105 / I9105P Galaxy2 PLUS -
STEP BY STEP rooting manual for GSM-Hosting users

Just follow this simple steps:


1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download CWMtouch-i9105_chotu.tar.md5.zip recovery image from here ------> Click HERE!
for other type fw (Indian) download this recovery image ---> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract CWM-touch_i9082_chotu.tar.zip !Select PDA and browse to where you have extracted CWM-touch_i9105_chotu.tar.md5 or CWM-touch_i9105_Indian_chotu.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- SelectInstall zip from sdcard --->choose zip from sdcard ---> scroll down and select Fix Recovery.zip and
again choose zip from sdcard and flash UPDATE-SuperSU-v1.05.zip

Available link for download

ORT JTAG ORT Plus V2 01 HTC Desire 300 Unlock IMEI Change SN Full Supported

• ORT Plus V2.01 Released
• HTC_301E DLL ( HTC desire 300 ) Released
  

• Platform Updates :
  • Qualcomm MSM8225 Routines are improved
  • Qualcomm MSM8225 NEW ID : 0x1077C0E1

• Download ORT Plus V2.01 here

• HTC Desire 300 / HTC Zara Mini / HTC 301E Full Support for following options
  • Repair Dead Boot
  • Unlocking
  • IMEI Change
  • SN Change
  • CID Change

• Advanced EFS Repair
  • ORT Repair files had already included EFS repair for many Samsung Phones for years !!
  • You do not need to download anything for that it is just inside the repair files .

• Universal JTAG Programmer
  • ORT JTAG has always been Universal JTAG Programmer for the supported CPUs
  • We do not limit you with the model list you can work with any model as long as you have the correct connection

• JTAG Finder Started
• Service Database for your center
  

• www.ORT-JTAG.com

Available link for download

Tutorial How to write IMEI in All SPD Phones having P 05b Connector

How to write IMEI with VolcanoBox

in All SPD Phones having P-05b Connector



Before Repairing IMEI, User must follow these -

User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -


SPD Android Usb Driver for win7/win8 (64bits)

SPD Android Usb Driver for winXP/win7 (32bits)

SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)

SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)


Now Make These Settings -

* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.

* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -




* After putting pins like this, Connect Handset on Volcano Main Cable.

* Attach Power cables also & Press "Set Pinout" button.

* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -





Now do as stated here -

Step 1 - Open Volcano tool and go to spd tab and (Enable IMEI Option)
Step 2 - Tick "Write IMEI" and Untick "Auto-detect pinouts"
Step 3 - Set R/W IMEI to "COM" and press RUN Button(New Tool will Open)
Step 4 - Select "USB" in ComP and Fill IMEI in boxes.
Step 5 - Press "Write IMEI" button
Step 6 - Now Connect the cable back to the BOX.
Step 7 - wait for 2-3 minutes..you see message "Write IMEI done".

Available link for download

Mtk IMEI Tool Download

Available link for download